TWIM15 SKF portable heater
This bearing induction heater is used to heat rolling bearings mounted on shafts with an interference fit. The heater expands the bearings for easier installation.
Basically, using TWIM 15 to heat the bearing to a temperature difference of 90 degrees Celsius can effectively improve the efficiency of the installation work.
Main features and advantages:
• Lightweight, easy to carry
• Innovative heating method, no magnetic rod required
• Automatically detect temperature and heating bearing size
• Two heating power levels and power configurations
• User-friendly control panel
• Quiet heating process
TWIM 15/110V ; TWIM 15/230V Technical Data
Maximum bearing weight: 20 kg (44 lb)
Minimum bearing inner diameter: 20 mm (0.79 in.)
Maximum bearing outer diameter: 320 mm (12.6 in.) 85 mm (3.35 in.)
Maximum bearing width: 85 mm (3.35 in.)
Heating performance example (bearing, weight, time:
22320CC/W33 12.8kg 110°C 12 minutes and 35 seconds
Maximum power consumption: TWIM 15/230V: 2,3 kVA TWIM 15/110V: 1,8 kVA
Voltage: TWIM 15/230V: 230V, 50Hz TWIM 15/110V: 110V, 60Hz
Maximum current consumption: TWIM 15/230V: 10A TWIM 15/110V: 16A
Temperature Control: 20-200 °C (68-392 °F) Heating process is non-magnetic
Heater Dimensions (W x D x H): 450 x 500 x 100 mm (17.7 x 19.7 x 3.9 in.)
Heater weight: 6.6 kg